The new CF-120 centrifugal pump was designed and manufactured by Cascade Fire Equipment Company for use on Slip-On Units. The CF-120 can pump up to 120 GPM and up to 300 PSI. The pump weighs 140 pounds and when equipped with a carrying base and integrated gas tank it makes a very good portable pump.
When we designed the CF-120, our objective was to design a pump ideally suited for use on Slip-On Units or as a high pressure, lightweight portable pump. We wanted a very dependable engine to drive the pump, and the pump had to meet the volumes and pressures needed in wildland firefighting. It also had to be very reliable, providing trouble-free service under firefighting conditions. If service were required, replacement parts had to be available at a reasonable price with easy installation. Our CF-120 meets and exceeds all of these objectives.
The CF-120 is available with carrying frame and integrated 3-gallon gas tank, hand primer, and liquid-filled pressure gauge when used as a portable pump. The truck mount model has a 1 thick polypropylene mounting base, remote 3-gallon gas tank with fuel line, quick-connect hand primer, and liquid-filled gauge.
SPECIFICATIONS:
Type: Single Stage Centrifugal
Suction: 2 NPSH Male
Discharge: 1.5 NH Male
Volute/Body: High strength aluminum alloy, hard coat anodized for extra corrosion resistance
Impeller: Fully enclosed all bronze construction, double hubs to balance hydraulic thrust, balanced to prevent vibration
Wear Ring: Bronze, long wearing and easily replaced
Seal: Carbon/ceramic mechanical
Bearings: Sealed Ball Bearings
Primer: Manual
ENGINE SPECIFICATIONS:
Briggs & Stratton, Model 350400, VanGuard V Twin air cooled, overhead valve design. Output 18 HP at 3600 RPM, 4 Cycle, gasoline fuel.
Starter: 12 Volt Electric & Manual Recoil
Lubrication: Full pressure lubrication system with automotive style filter. Oil fill tube with dip stick.
Fuel Tank: Integrated tank is 9 quarts. Remote is 3 gallons with optional 6 gallon size. Fuel pump is standard with engine.
