In-Line Eductors

These lightweight Pyrolite® In-Line Eductors are available in 60, 95, or 125 GPM. They also have the new Akron® detachable metering valve, with a larger metering dial that is easier to turn and read. This valve has an infinite number of settings between 0% and 6% with detents at .25%, .5%, 1%, 3% and 6%.

These Eductors operate equally well with Class A and B Foams while requiring little maintenance, and they are now available with higher flows and usable with longer hose lays with Class A foam. The inlet can be either a 1½” or 2½” female swivel and the discharge is always a 1½” male thread. The weight on the complete unit, including pickup assembly, is only 3½ lbs. The length, with the 1½” discharge, is 7¾” and the 2½” is 8½”.

• Infinite number of settings between 0% and 6%
• Detents at .25%, .5%, 1%, 3%, and 6%
• Available in various flows: 60, 95, or 125 GPM
• Rated flow calibrated at 200 PSI Inlet Pressure
• Performs well with 75 PSI and 100 PSI rated nozzles
• Larger, easyto-read metering dial with positive position stops
• Pickup tube of reinforced clear PVC hose to help preventkinking

NOTE: All hose lay is based on a maximum of 10’ elevation
*Measured from the dischargeside of the eductor with 200 psi inlet pressure