Slip-On Gallery
Some of the most popular options for slip-ons are shown below. On some of the smaller units space may not allow for installation of all options.
Hose Reel Options
Hose Reel options are available, such as aluminum reels. Chrome Hose Roller Guides Guides speed the handling of the hose and reduce wear and damage. The rollers can be installed on one or both sides of the reel in either a High or Low configuration. Click for Additional InfoElkhart Monitor
The SIDEWINDER™ Remote Controlled Monitor was designed for wildland firefighting operations. It can be mounted on the bumper or other suitable locations on the vehicle. Click for Additional InfoCascade Monitor
This monitor was designed specifically for water tankers and pumpers where discharges of 350 GPM or less is required. This is an ideal monitor for discharging water or Class A foams in wildland firefighting. Click for Additional InfoAluminum Toolbox
Every one of our Aluminum Toolboxes is manufactured on-site, designed to create the best fit for your truck, your Slip-On Firefighting Unit, and your quick-response firefighting needs. Click for Additional InfoHose Tray
The Hose Tray is constructed from heavy aluminum diamond plate. The hinged top allows for easy loading of the hose, and the hinged and latched doors on the ends keep your hose and nozzle inside. A turtle tile base ensures proper ventilation. A rotary joint enables hose removal from either side, and the full-flow ball valve controls the water flow. This standard Hose Tray accommodates 200' of 1½" hose. Click for Additional InfoSpare Tire Bracket
By adding a spare tire bracket to the top of your tank, you can increase the amount of available space in your truck bed and make easy access to your spare. Click for Additional InfoFoam Flo
The Foam-Flo™ is an inexpensive device for proportioning Class A Foam into the hose line. This device takes a small amount of water from the discharge side of the pump and picks up foam concentrate from the foam supply, then feeds the foam solution into the suction side of the pump. Click for Additional InfoHydrant Fill
The hydrant fill comes standard with a 1½” fire service slip-out valve and customer’s choice of 1½” male NST with cap or 1½” female swivel with plug. This fill provides quick refill from a hydrant or water tender. Click for Additional InfoLiquid Level Gauges
Get level readings at a glance with with the IntelliTank Foam and Water Gauges for End-Mount Units, or the MC Liquid Level Gauge for Top Mount Units. Click for Additional InfoFoam Pro 1601
The FoamPro leads the industry with proven reliability, and provides the smoothest proportioning available at low flows for the best foam generation for Slip-On pumper units and smaller forestry pumpers. Click for Additional InfoDiesel Pump and Engine
Briggs & Stratton Vanguard in-line 3 cylinder, water-cooled, overhead valve delivering a maximum output of 26.5 hp @ 3600 RPM, 58.1 cubic inches displacement, 4-cycle, diesel fueled. Body and head are made of high-strength aluminum alloy, anodized for superior corrosion resistance. 23 HP Pump and Motor
The CF-130 is a centrifugal pump powered by a 23 hp Briggs & Stratton Vanguard Engine. The engine has a manual recoil and a 12-volt electric starter. Click for Additional Info |
